3-axis Force Sensor 2 lb 5lb 10 lb 20lbf Multi Axis Load Cell Triaxial Transducer

3-axis Force Sensor 2 lb 5lb 10 lb 20lbf Multi Axis Load Cell Triaxial Transducer

Miniature Multi-axis Load Cell FNZ is made of aluminum based on strain gauge technology offering 0-2.2lb / 0-4.5lb / 0-11.2lb / 0-22.5lb four measuring ranges for all three axes,each axis is capable of measuring force in both tension and compression direction. 3-Axis Force Sensor FNZ utilizes independent wheatstone full bridge for each axis to deliver mV/V output which proportional to the applied force and requires no mathematical manipulation,3-channel signal amplifier LC3A can be used to convert the mV signal into 0-5V / 0-10V / 4-20mA output. Taking 3d force transducer FNZ-100N and LC3A(-10-10V)-24V for example,the load-voltage relationship will be 0-100N load in Fx+/Fy+/Fz+ direction VS 0~10V output, 0-100N load in Fx-/Fy-/Fz- direction VS 0~(-10V) output.Typical applications for multi-axis sensor FNZ are for example friction force measurement,force control in robotics,force simulators, force monitoring in handing devices,industrial test benches,and so on.

Specifications

Load cell glossary:

Load Cell:A device which produces an output signal proportional to the applied weight or force.

Wheatstone Bridge:A Wheatstone bridge is a network of four resistive legs. One or more of these legs can be active sensing elements. The Wheatstone bridge is the electrical equivalent of two parallel voltage divider circuits. R1 and R2 compose one voltage divider circuit, and R4 and R3 compose the second voltage divider circuit. The output of a Wheatstone bridge is measured between the middle nodes of the two voltage dividers.
Excitation: The voltage applied to the input terminals of the load cell.

Rated Capacity: The maximum axial load the load cell is designed to measure within its specifications.

Non-linearity: The maximum deviation of the calibration curve from a straight line drawn between the no-load and rated outputs; expressed as a percentage of the rated output and measured on increasing load only.

Non-repeatability: The maximum difference between load cell output readings for repeated loadings under identical loading and environmental conditions.

Hysteresis: The maximum difference between load cell output readings for the same applied load; one reading obtained by increasing the load from zero and the other by decreasing the load from rated output; usually measured at half rated output and expressed in percent of rated output.

Creep: The change in load cell output occurring with specified period of time, while under load, and with all environmental conditions and other variables remaining constant; usually measured with rated load applied.

Safe Overload: The maximum load in percent of rated capacity which can be applied without producing a permanent shift in performance characteristics beyond those specified.

3-axis Force Sensor 2lb 5 lb 10lb 20 lbf Multi Axis Load Cell Transducer

Click here to download datasheet