|Place of Origin:||China|
|Minimum Order Quantity:||1pc|
|Packaging Details:||Shockproof carton|
|Delivery Time:||3-20 working days|
|Payment Terms:||T/T, Western Union, MoneyGram,Paypal|
|Output:||Analog Output||Principle:||Strain Gauge Load Cell|
0-100 ton Compression Load Cell With Indicator For Compression Load Measurement
Compression Load Sensor FCM is made of high stiffness alloy steel based on foil strain gauge technology to deliver 2.0mV/V rated output proportional to the applied force.Pancake load cell FCM offers 0.5 ton / 1 ton / 2ton / 3 ton / 5ton / 7 ton / 10ton / 20 ton / 25ton / 30 ton / 50ton / 60 ton / 100 ton thirteen rated capacities to choose from.Force transducer FCM is suitable for both static and dynamic force measurement in tension and compression direction.Low profile structure makes it also suitable for in-line force monitoring.Pancake loadcell FCM is designed with a metric threaded hole running through the center of the transducer which can be used to mount attachments such as load buttons,eye bolts or other adapters for force loading,this makes spoke type load cells very adaptable to various cases,you may find pancake type load cell FCM applicable for force measurement in injection-molding machines,press machines and material testing equipment,weight measurement for tanks,vessels and hoppers, and so on.
0.5t / 5kN / 1.1 klb
1t / 10kN / 2.2klb
2t / 20kN/ 4.4k lb
3t / 30kN/ 6.6 klb
5t / 50kN/ 11klb
7t / 70kN/ 15 klb
10t/ 100kN/ 22 klb
20t/ 200kN/ 44klb
25t/ 250kN/ 55k lbf
30t/ 300kN/ 66k lb
50t/ 500kN/ 110k lbf
60t/ 600kN/ 132k lb
100t/ 1000kN/ 220k lbf
|Zero balance||±2% of R.O.|
|Nonlinearity||±0.05% of R.O.|
|Hysteresis||±0.05% of R.O.|
|Nonrepeatability||±0.03% of R.O.|
|Creep(30min)||±0.03% of R.O.|
|Safe overload||150% of F.S.|
|Ultimate overload||200% of F.S.|
|Temperature shift zero||±0.05% R.O./10oC|
|Temperature shift span||±0.05% R.O./10oC|
|Input resistance||385±30 ohms|
|Output resistance||350±10 ohms|
|Insulation resistance||>5000M ohms|
|Material of element||Alloy steel|
A load cell sensor is a transducer that converts a load or force acting on it into electronic signal which is proportional to the load(or force) being applied.The measured load or force causes deformation of the measuring element(elastic body),the bonded strain gauge deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply,the output signal between Sig+ and Sig- will change proportionally,thus the load/force can be measured by measuring the output signal from the load cell.
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output is normally within 1mV/V~3mV/V.
Power supply is normally within 3-15V.
Load / Capacity is within 0-1.
So the load cell output signal is normally within 0-45mV(-45mV...+45mV for bidirectional load cell).
Example one: 2.0mV/V load cell with 10V power supply,the output range is 0~20mV (-20mV...+20mV for bidirectional sensor).
Example two: 1.0mV/V load cell with 5V power supply,the output range is 0~5mV (-5mV...+5mV for bidirectional sensor).
Load cell + Signal amplifier:
Load cell normally outputs -30mV...+30mV which sometimes cannot be recognized by signal processing units directly,so signal conditioner is introduced to convert mV signal into 0-5V/0-10V/4-20mA for easy signal processing.
Example: 10kg compression load cell working with 0-10V amplifier,the load-output relationship will be 0-10kg load VS 0-10V output,it is linear within the error range.
Load cell + Digital indicator
Digital indicator can work directly with load cell without signal amplifier,here are some functions from the indicator:
-Display force value in real time
-Peak holding to grab the maximum force during testing
-RS485 or RS232 interface
-0-5V/0-10V/4-20mA analog output
1 ton 2 ton 5ton 10 ton 20ton 30 ton 50 ton 100ton Compression Load Cell With Digital Display