Load cells,Force sensors,Torque transducers

Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsTension load cell

M8 Theaded Rod End Push Pull Load Cell 500N 1kN 2kN 3kN 5kN Pull Force Measurement

M8 Theaded Rod End Push Pull Load Cell 500N 1kN 2kN 3kN 5kN Pull Force Measurement

    • M8 Theaded Rod End Push Pull Load Cell 500N 1kN 2kN 3kN 5kN Pull Force Measurement
    • M8 Theaded Rod End Push Pull Load Cell 500N 1kN 2kN 3kN 5kN Pull Force Measurement
    • M8 Theaded Rod End Push Pull Load Cell 500N 1kN 2kN 3kN 5kN Pull Force Measurement
    • M8 Theaded Rod End Push Pull Load Cell 500N 1kN 2kN 3kN 5kN Pull Force Measurement
    • M8 Theaded Rod End Push Pull Load Cell 500N 1kN 2kN 3kN 5kN Pull Force Measurement
  • M8 Theaded Rod End Push Pull Load Cell 500N 1kN 2kN 3kN 5kN Pull Force Measurement

    Product Details:

    Place of Origin: China
    Brand Name: Forsentek
    Certification: CE
    Model Number: FL34

    Payment & Shipping Terms:

    Minimum Order Quantity: 1pc
    Packaging Details: Shockproof carton
    Delivery Time: 3-20 working days
    Payment Terms: T/T, Western Union, MoneyGram,Paypal
    Supply Ability: 3360pcs/month
    Contact Now
    Detailed Product Description
    Material: Stainless Steel Capacity: 0.5/1/2/3/5kN
    Output: Analog Male Thread: M8
    Measurement: Push/Pull

    M8 Theaded Rod End Push Pull Load Cell 500N 1kN 2kN 3kN 5kN Pull Force Measurement

    Rod End Push And Pull Force Sensor FL34 is made of stainless steel using strain gauge technology, compression and tension load cell FL34 is available in 0-0.5kN / 0-1kN / 0-2kN / 0-3kN / 0-5kN five different measuring ranges,the force sensor features M8 threaded rods on two sides for the mounting of attachments or implements for both tension and compression force measurement, you may find model FL34 suitable for applications such as force overload protection,press-in force measurement, cylinder push pull force measurement, in-line force measurement, auto equipment, production line, connectors insertion and extraction force measurement, press machine.etc. Push And Pull Load Cell FL34 can also be modified or customized.

    Pull load cell 100kg 200kg 300kg 500kgpull force transducer 5kN 3kN 2kN 1KN

    Specifications

    Rated capacity

    500N / 50kg / 112lb

    1000N / 100kg / 225lb

    2000N / 200kg / 450lb

    3000N / 300kg / 674lb

    5000N / 500kg / 1.12klb

    Rated output 1.5 mV/V Compensated temperature -10...+40oC
    Excitation 3-15V Operating temperature -20...+60oC
    Zero balance ±0.05mV/V Temperature shift zero ±0.02% R.O./oC
    Nonlinearity ±0.5% R.O. Temperature shift span ±0.02% R.O./oC
    Hysteresis ±0.5% R.O. Input resistance 385±30 ohms
    Nonrepeatability ±0.2% R.O. Output resistance 350±5 ohms
    Creep(5min) ±0.1% R.O. Insulation resistance >5000Mohms
    Safe overload 150% F.S. Ingress protection IP66
    Ultimate overload 200% F.S. Material of element Stainless steel
    Cable Ø4*3000mm 4-core shielded cable
    Wiring code

    Compression @

    Red--Power input+    Black--Power input-

    Green--Signal output+    White--Signal output-

     

    A force sensor is a transducer that converts force acting on it into electronic signal which is proportional to the applied force.The acting force causes deformation of the measuring element,the bonded strain gage deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply,the output signal between Sig+ and Sig- will change proportionally,thus the force can be measured by measuring the output signal from the load cell.Tension and compression force transducer FL34 is designed to measure force in both tension and compression direction,outputs millivolt signal ranging -25~25mV, and signal amplification may be required for most applications, a load cell signal conditioner can be used to get -5~5V, 0-10V or 4-20mA signal which is proportional to applied force.The amplified output is can be easily processed by PLCs and data acquisition software.The force can be displayed through force indicator,force meter FPT is integrated with high accuracy/low noise 24 bit Sigma-Delta ADC,sampling speed up to 960Hz makes it suitable for both static and dynamic measurement;FPT also supports Modbus RTU protocol with RS485 or RS232 communication port,amplified signal 0-5V,0-10V,0-20mV or 4-20mA is also achievable from FPT.

    M8 Theaded Rod End Push Pull Load Cell 500N 1kN 2kN 3kN 5kN Compression Tension Sensor

    pull force sensor 500N 1kN 2kN 3kN 5kN

    Click here to download datasheet

    Contact Details
    Force sensor torque transducer

    Contact Person: Mr. Tarik Lu

    Tel: 86-755-84536383

    Send your inquiry directly to us (0 / 3000)

    Other Products