|Place of Origin:||China|
|Minimum Order Quantity:||1pc|
|Packaging Details:||Shockproof carton|
|Delivery Time:||3-20 working days|
|Payment Terms:||T/T, Western Union, MoneyGram,Paypal|
|Material:||Aluminum||Capacity:||60kg 100kg 200kg 350kg|
|Output:||Analog Output||Principle:||Strain Gauge Load Sensor|
Dimensions(unit in "mm")
|Rated capacity||60kg 100kg 200kg 350kg|
|Safe overload||150% F.S.|
|Ultimate overload||200% F.S.|
|Temperature shift zero||±0.02% R.O./10oC|
|Temperature shift span||±0.02% R.O./10oC|
|Input resistance||405±10 ohms|
|Output resistance||350±5 ohms|
|Insulation resistance||>5000M ohms|
|Material of element||Aluminum alloy|
|Cable||Ø5*1500mm 4-core shielded|
A load sensor is a transducer that converts weight or force into electrical signal which is proportional to the weight or force acting on it.The measured load or force causes deformation of the elastic body,the bonded strain gauge deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply,the output signal between Sig+ and Sig- will change proportionally,thus the weight orforce can be measured by measuring the output signal from the weight transducer.
Strain gage load cell normally normally outputs 0-30mV(-30~30mV for bidirectional sensor) signal,and signal amplification is needed for most applications,a load cell signal conditioner can be used to get ±5V,±10V,0-5V,0-10V or 4-20mA signal for easy data acquisition.
Weighing indicator can be used to display the load value,load cell indicator FPT is integrated with high accuracy/high speed 24-bit ADC,sampling speed up to 960Hz makes it suitable for for both static and dynamic measurement,supports RS485 or RS232 communication port,can also output 0-5V,0-10V,0-20mV or 4-20mA amplified signal for PLC control.