Load cells,Force sensors,Torque transducers

Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsOther products

Tension compression load cell|In-line load cells

Tension compression load cell|In-line load cells

    • Tension compression load cell|In-line load cells
    • Tension compression load cell|In-line load cells
    • Tension compression load cell|In-line load cells
    • Tension compression load cell|In-line load cells
    • Tension compression load cell|In-line load cells
  • Tension compression load cell|In-line load cells

    Product Details:

    Place of Origin: China
    Brand Name: Forsentek
    Model Number: FL30

    Payment & Shipping Terms:

    Minimum Order Quantity: 1pc
    Packaging Details: Shockproof carton
    Delivery Time: 4 working weeks
    Payment Terms: T/T, Western Union, MoneyGram,Paypal
    Supply Ability: 2000pcs/month
    Contact Now
    Detailed Product Description
    Material: Stainless Steel Capacity: 2kn 3KN 5KN 10KN 20KN
    Output: Analog Output Principle: Strain Gauge Load Cell
    Force Measure Direction: Tension And Compression

    Tension compression load cell in-line load cells

    in-line load cells

    Features

    • Stainless steel construction,inline structure
    • M16 threaded rods on both sides,easy to install
    • Strain gauge technology,analog output
    • Tension and compression force measurement
    • Widely used for force overload protection,press-in force measurement,cylinder push pull force measurement,auto equipment,production line,press machine.etc.

    Dimensions(unit in "mm")
    inline load cell
     
    Specifications

    Rated capacity  2KN 3KN 5KN 10KN 20KN
    Rated output  1.5mV/V
    Excitation  5-15V
    Zero balance  ±2% of R.O.
    Nonlinearity  ±1% of R.O.
    Hysteresis  ±1% of R.O.
    Nonrepeatability  ±0.3% of R.O.
    Creep(30min)  ±0.1% of R.O.
    Safe overload  150% of F.S.
    Ultimate overload  200% of F.S.
    Compensated temperature  -10...+40oC
    Operating temperature  -20...+60oC
    Temperature shift zero  ±0.01% R.O./oC
    Temperature shift span  ±0.01% R.O./oC
    Input resistance  385±30 ohms
    Output resistance  350±5 ohms
    Insulation resistance  >5000M ohms
    Ingress protection  IP66
    Material of element  Stainless steel
    Cable  Ø5*1800mm(Longer cable available)
    Wiring code

    Tension@ Red--Exc+   Black--Exc-
     Green--Sig+ White--Sig-

     
    rod end load cell

    A load cell is a transducer that converts load or force acting on it into electronic signal which is proportional to the applied force.The acting force causes deformation of the measuring element,the bonded strain gage deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply,the output signal between Sig+ and Sig- will change proportionally,thus the load/force can be measured by measuring the output signal from the load cell.

    force measurement

    Inline load cell FL30 is designed to measure both pull force and push force,outputs millivolt signal ranging -20~20mV, and signal amplification may be required for most applications, a load cell signal conditioner can be used to get -5~5V, 0-10V or 4-20mA signal which is proportional to applied force.The amplified output is can be easily processed by PLCs and data acquisition software.

    force sensors
    The applied force can be displayed through a force indicator,force meter FPT is integrated with high accuracy/low noise 24 bit Sigma-Delta ADC,sampling speed up to 960Hz makes it suitable for both static and dynamic measurement; FPT also supports Modbus RTU protocol with RS485 or RS232 communication port,amplified signal 0-5V,0-10V,0-20mV or 4-20mA is also achievable from FPT.

    Contact Details
    Force sensor torque transducer

    Contact Person: Mr. Tarik Lu

    Tel: 86-755-84536383

    Send your inquiry directly to us (0 / 3000)

    Other Products