Load cells,Force sensors,Torque transducers

Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsS type load cell

Yarn tension sensor 20N tension and compression load cell 2kg

Yarn tension sensor 20N tension and compression load cell 2kg

    • Yarn tension sensor 20N tension and compression load cell 2kg
    • Yarn tension sensor 20N tension and compression load cell 2kg
    • Yarn tension sensor 20N tension and compression load cell 2kg
  • Yarn tension sensor 20N tension and compression load cell 2kg

    Product Details:

    Place of Origin: China
    Brand Name: Forsentek
    Model Number: FS02

    Payment & Shipping Terms:

    Minimum Order Quantity: 1pc
    Packaging Details: Shockproof carton
    Delivery Time: 3-20 working days
    Payment Terms: T/T, Western Union, MoneyGram,Paypal
    Supply Ability: 5000pcs/month
    Contact Now
    Detailed Product Description
    Material: Aluminum Alloy Capacity: 2kg
    Output: Analog Output Principle: Strain Gauge Load Cell
    Force Measure Direction: Pull/push

    Yarn tension sensor 20N tension and compression load cell 2kg

    pull load cell


    Features

    • Pull load cell,small size size
    • Strain gauge technology,analog output,high accuracy
    • Pull push force measurement
    • Widely used for yarn tension force monitoring,press force test,keyboard testing,auto equipment,production line,press machine.etc.

    Dimensions(unit in "mm“)

    pull load cell FS02

    Specifications

    Rated capacity  2kg
    Rated output  1.1mV/V
    Excitation  3-15V
    Zero balance  ±2% of R.O.
    Nonlinearity  ±0.05% of R.O.
    Hysteresis  ±0.05% of R.O.
    Nonrepeatability  ±0.03% of R.O.
    Creep(30min)  ±0.05% of R.O.
    Safe overload  120% of F.S.
    Ultimate overload  150% of F.S.
    Compensated temperature  -10...+40oC
    Operating temperature  -20...+60oC
    Temperature shift zero  ±0.05% R.O./oC
    Temperature shift span  ±0.05% R.O./oC
    Input resistance  410±30 ohms
    Output resistance  350±5 ohms
    Insulation resistance  >5000M ohms
    Ingress protection  IP62
    Material of element  Aluminum alloy
    Cable  Ø3*95mm
    Wiring code

     Red--Exc+   Black--Exc-
     Green--Sig+ White--Sig-

     
    S type load cell is known as s beam load cell because of its feasured s beam structure,s-type force sensor is able to measure both tension force and compression force.The sensor can convert load or force acting on it into electronic signal which is proportional to the applied force.The acting force causes deformation of the measuring element,the bonded strain gage deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply,the output signal between Sig+ and Sig- will change proportionally, thus the load/force can be measured by measuring the output signal from the load cell.

    force measurement

    Strain gauge based pull load cell FS02 outputs millivolt signal ranging -20~20mV, and signal amplification may be required for most applications, a load cell signal conditioner can be used to get -5~5V, 0-10V or 4-20mA signal which is proportional to applied force.The amplified output is can be easily processed by PLCs and data acquisition software.

    measure force
    The applied force can be displayed through a load cell indicator,force indicator FPT is integrated with high accuracy/low noise 24 bit Sigma-Delta ADC,sampling speed up to 960Hz makes it suitable for both static and dynamic measurement; FPT also supports Modbus RTU protocol with RS485 or RS232 communication port,amplified signal 0-5V,0-10V,0-20mV or 4-20mA is also achievable from FPT.

    Contact Details
    Force sensor torque transducer

    Contact Person: Mr. Tarik Lu

    Tel: 86-755-84536383

    Send your inquiry directly to us (0 / 3000)

    Other Products