Payment & Shipping Terms:
|Material:||Alloy Steel/Aluminum||Capacity:||0.2NM 0.5NM 1NM 2NM 3NM 5NM 10NM 20NM 30NM 50NM 100NM|
|Type:||Flange Type Reaction Torque Transducer||Principle:||Strain Gauge Torque Sensor|
Flange torque sensor flange torque transducer torque measurement
|Rated capacity||0.2NM 0.5NM 1NM 2NM 3NM 5NM 10NM 20NM 30NM 50NM 100NM|
|Zero balance||±2% R.O.|
|Safe overload||150% F.S.|
|Ultimate overload||200% F.S.|
|Temp. shift zero||±0.02% R.O./oC|
|Temp. shift span||±0.01% R.O./oC|
|Input resistance||350(700) ohms|
|Output resistance||350(700) ohms|
|Insulation resistance||>2000M ohms|
|Material of element||Aluminum alloy/Alloy steel|
|Wiring code||Red--Exc+ Black--Exc- Green--Sig+ White--Sig-|
A torque sensor is a transducer that converts a torsional mechanial input into an electrical output signal. Torque transducers can be devided into two types:rotary torque sensors and reaction torque sensors depending on the torque it's going to measure.Rotating torque sensors are able to measure both rotating torque and non-rotating torque while static torque transducers can only measure non-rotating torque or torque with small rotating angle.
Flange torque sensor FTA is designed to measure static torque which is also known as reaction torque.The output range of FTA is normally between -20~20mV which is proportional to applied torque, signal conditioner can be used to get -5~5V,-10~10V,0-5V,0-10V or 4-20mA output for easy data acquisition.
Torque indicator can be used to display the torque value.Digital meter FPT is integrated with high accuracy 24-bit ADC,up to 960Hz sampling speed make it suitable for both static measurement and dynamic measurement.FPT also supports RS485/RS232 communication interface and amplified signal output 0-10V/0-5V/4-20mA which is proportional to the measured value.