Load cells,Force sensors,Torque transducers

Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsCompression load cell

Pedal force sensor 1kN 2kN for car brake pedal force measurement

Pedal force sensor 1kN 2kN for car brake pedal force measurement

    • Pedal force sensor 1kN 2kN for car brake pedal force measurement
    • Pedal force sensor 1kN 2kN for car brake pedal force measurement
    • Pedal force sensor 1kN 2kN for car brake pedal force measurement
    • Pedal force sensor 1kN 2kN for car brake pedal force measurement
  • Pedal force sensor 1kN 2kN for car brake pedal force measurement

    Product Details:

    Place of Origin: China
    Brand Name: Forsentek
    Certification: CE
    Model Number: FCB-B

    Payment & Shipping Terms:

    Minimum Order Quantity: 1pc
    Packaging Details: Shockproof carton
    Delivery Time: 3-20 working days
    Payment Terms: T/T, Western Union, MoneyGram,Paypal
    Supply Ability: 5000pcs/month
    Contact Now
    Detailed Product Description
    Material: Aluminum Alloy Capacity: 1KN 2KN
    Principle: Strain Gauge Load Cell Application: Car Braking Pedal Force Measurement

    Pedal force sensor 1kN 2kN for car brake pedal force measurement

     

    pedal force sensor

    load cell datasheet
    Features

    • Aluminum construction,low profile design,easy to install
    • Strain gauge technology,analog output
    • Temperature compensated
    • Specially designed for car braking force measurement

    Dimensions
    pedal force load cell FCB-B
     Specifications

    Rated capacity 1KN 2KN
    Rated output 1.5mV/V
    Excitation 3-15V
    Zero balance ±2% of R.O.
    Non-linearity ±0.2% of R.O.
    Hysteresis ±0.2% of R.O.
    Non-repeatability ±0.1% of R.O.
    Creep(10min) ±0.1% of R.O.
    Safe overload 150% of F.S.
    Ultimate overload 200% of F.S.
    Compensated temp. -10...+40oC
    Operating temp. -20...+60oC
    Temperature shift zero ±0.05% R.O./10oC
    Temperature shift span ±0.05% R.O./10oC
    Input resistance 75±30 ohms
    Output resistance 700±10 ohms
    Insulation resistance >2000M ohms
    Ingress protection IP62
    Material of element Aluminum alloy
    Cable Ø4*2000mm
    Wiring code

    Red--Exc+   Black--Exc-
    Green--Sig+ White--Sig-

     
    car braking force measurement

    A load cell sensor is a transducer that converts a load or force acting on it into electronic signal which is proportional to the load(or force) being applied.The measured load or force causes deformation of the measuring element(elastic body),the bonded strain gauge deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply,the output signal between Sig+ and Sig- will change proportionally,thus the load/force can be measured by measuring the output signal from the load cell.Pedal force sensor FCB-B is specially designed for car braking force measurement.Built-in amplifier for 0-5V/0-10V/4-20mA output is available.
    A strain gauge load cell normally outputs millivolt signal ranging 0-30mV(-30~30mV for bidirectional sensor),and signal amplification may be required for most applications,a load cell signal transmitter can be used to get ±5V,±10V,0-5V,0-10V or 4-20mA signal for easy data acquisition afterwards.

    load cell signal conditioner
    Force indicator can be used to display the measured value,load cell display FPT is integrated with high accuracy 24 bit Sigma-Delta ADC,sampling speed up to 960Hz,supports RS485 or RS232 communication port,can also output 0-5V,0-10V,0-20mV or 4-20mA amplified signal.
    force indicator

    load cell ce approved

    Contact Details
    Force sensor torque transducer

    Contact Person: Mr. Tarik Lu

    Tel: 86-755-84536383

    Send your inquiry directly to us (0 / 3000)

    Other Products