Load cells,Force sensors,Torque transducers
Load cells,Force sensors,Torque transducers
 |
| Place of Origin: | China |
| Brand Name: | Forsentek |
| Certification: | CE |
| Model Number: | FCB-B |
| Minimum Order Quantity: | 1pc |
|---|---|
| Packaging Details: | Shockproof carton |
| Delivery Time: | 3-20 working days |
| Payment Terms: | T/T, Western Union, MoneyGram,Paypal |
| Supply Ability: | 2600pcs/month |
| Material: | Aluminum | Capacity: | 500N 1KN 2KN |
|---|---|---|---|
| Type: | Pedal Force Transducer | Application: | Car Braking Pedal Force Measurement |
Pedal force sensor 1kN 2kN for car brake pedal force measurement
Features
Dimensions
Specifications
| Rated capacity |
1KN 2KN (100kg 200kg) |
| Rated output | 1.5mV/V |
| Excitation | 3-15V |
| Zero balance | ±2% of R.O. |
| Non-linearity | ±0.2% of R.O. |
| Hysteresis | ±0.2% of R.O. |
| Non-repeatability | ±0.1% of R.O. |
| Creep(10min) | ±0.1% of R.O. |
| Safe overload | 150% of F.S. |
| Ultimate overload | 200% of F.S. |
| Compensated temp. | -10...+40oC |
| Operating temp. | -20...+60oC |
| Temperature shift zero | ±0.05% R.O./10oC |
| Temperature shift span | ±0.05% R.O./10oC |
| Input resistance | 750±30 ohms |
| Output resistance | 700±10 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP62 |
| Material of element | Aluminum alloy |
| Cable | Ø4*2000mm 4-core shielded |
| Wiring code |
Red--Excitation+ Black--Excitation- |
A load cell sensor is a transducer that converts a load or force acting on it into electronic signal which is proportional to the load(or force) being applied.The measured load or force causes deformation of the measuring element(elastic body),the bonded strain gauge deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply,the output signal between Sig+ and Sig- will change proportionally,thus the load/force can be measured by measuring the output signal from the load cell.Pedal force sensor FCB-B is specially designed for car braking force measurement.Built-in amplifier for 0-5V/0-10V/4-20mA output is available.
A strain gauge load cell normally outputs millivolt signal ranging 0-30mV(-30~30mV for bidirectional sensor),and signal amplification may be required for most applications,a load cell signal transmitter can be used to get ±5V,±10V,0-5V,0-10V or 4-20mA signal for easy data acquisition afterwards.
Force indicator can be used to display the measured value,load cell display FPT is integrated with high accuracy 24 bit Sigma-Delta ADC,sampling speed up to 960Hz,supports RS485 or RS232 communication port,can also output 0-5V,0-10V,0-20mV or 4-20mA amplified signal.
Multi axis load cell 1kg 2kg 5kg 10kg 3-axis force measurement transducer
Triaxial force sensor 1kN 500N 300N 200N 100N 3-axis load cell
3 axis load cell 200kN 100kN 50kN 20kN 10kN 5kN 2kN 1kN Triaxial force sensor
Triaxial load cell 1000kg 500kg 200kg 100kg Triaxial force sensor
Miniature rotary torque sensor 1NM 2NM 3NM 5NM rotating torque measurement
Rotary torque sensor 10NM 20NM 50NM 100NM 200NM 300NM 500NM torque transducer
Contactless rotating type torque speed sensor measuring motor torque
Micro force sensor 50N 100N 200N 500N Micro loadcell sensor
10KG miniature load cell sensor 5kg small size weight transducer 2kg
Miniature force transducer 0-1000N miniature force sensor 0-220 lbs
Miniature force transducer 50N 100N 200N 500N 1kN 2kN force measurement
