Payment & Shipping Terms:
|Material:||Stainless Steel||Capacity:||5kg 10kg 20kg 50kg 100kg|
|Output:||Analog Output||Principle:||Strain Gauge Load Cell|
Micro load cell sensor miniature load cell
|Rated capacity||5kg 10kg 20kg 50kg 100kg|
|Nonlinearity||±1% of R.O.|
|Hysteresis||±1% of R.O.|
|Nonrepeatability||±0.5% of R.O.|
|Creep(30min)||±0.5% of R.O.|
|Safe overload||150% of F.S.|
|Ultimate overload||200% of F.S.|
|Temperature shift zero||±0.05% R.O./oC|
|Temperature shift span||±0.01% R.O./oC|
|Input resistance||350±30 ohms|
|Output resistance||350±10 ohms|
|Insulation resistance||>2000M ohms|
|Material of element||Stainless steel|
A load sensor is a transducer that converts a load or force acting on it into electronic signal which is proportional to the load or force being applied.The measured load or force causes deformation of the measuring element,the bonded strain gage deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply,the output signal between Sig+ and Sig- will change proportionally,thus the load/force can be measured by measuring the output signal from the load cell.
Micro load cell FC10 outputs millivolt signal ranging 0-10mV,and signal amplification may be required for most applications,a load cell signal transmitter can be used to get 0-5V,0-10V or 4-20mA signal for easy data acquisition afterwards.
Weight indicator can be used to display the measured value,load cell display FPT is integrated with high accuracy 24 bit Sigma-Delta ADC,sampling speed up to 960Hz,supports RS485 or RS232 communication port,can also output 0-5V,0-10V,0-20mV or 4-20mA amplified signal.