Load cells,Force sensors,Torque transducers

About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsOther products

Compression load cell measure force

Compression load cell measure force

    • Compression load cell measure force
    • Compression load cell measure force
    • Compression load cell measure force
    • Compression load cell measure force
    • Compression load cell measure force
  • Compression load cell measure force

    Product Details:

    Place of Origin: China
    Brand Name: Forsentek
    Model Number: FC20C

    Payment & Shipping Terms:

    Minimum Order Quantity: 1pc
    Packaging Details: Shockproof carton
    Delivery Time: 3-20 working days
    Payment Terms: T/T, Western Union, MoneyGram,Paypal
    Supply Ability: 5000pcs/month
    Contact Now
    Detailed Product Description
    Material: Stainless Steel Capacity: 2000kg 1000kg 500kg 300kg 200kg 100kg 50kg 30kg 20kg 10kg 5kg
    Output: Analog Output Principle: Strain Gauge Load Cell

    Compression load cell measure force

    measure force


    • Stainless steel construction
    • Button type load cell,small size with 20mm outer diameter
    • Mounting holes on the bottom,easy to install
    • Strain gauge technology,analog output
    • Compression force measurement
    • Widely used for force overload protection,pressure distribution measurement,auto equipment,production line,keyboard press force test.etc.

    measure force

    Dimensions(unit in "mm")
    compression load cell

    Rated capacity 2000kg 1000kg 500kg 300kg 200kg 100kg 50kg 20kg 10kg 5kg
    Rated output  1.2-1.8mV/V
    Excitation  5-12V
    Zero balance  ±3% of R.O.
    Non-linearity  ±0.5% of R.O.
    Hysteresis  ±0.5% of R.O.
    Non-repeatability  ±0.2% of R.O.
    Creep(30min)  ±0.2% of R.O.
    Safe overload  150% of F.S.
    Ultimate overload  200% of F.S.
    Compensated temp.  -10...+40oC
    Operating temp.  -20...+60oC
    Temp. shift on zero  ±0.01% R.O./oC
    Temp. shift on span  ±0.01% R.O./oC
    Input resistance  350±30 ohms
    Output resistance  350±10 ohms
    Insulation resistance  >5000M ohms
    Ingress protection  IP65
    Material of element  Stainless steel
    Cable  Ø3*2800mm(Longer cable available)
    Wiring code

     Red--Exc+   Black--Exc-
     Green--Sig+ White--Sig-


     compression load cell
    A compression load cell is a transducer that converts compression force acting on it into electronic signal which is proportional to the load or force being applied.The applied force causes deformation of the measuring element,the bonded strain gage deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply,the output signal between Sig+ and Sig- will change proportionally,thus the compression force can be measured by measuring the output signal from the load cell.
    Button type load cell FCLB outputs millivolt signal ranging 0-15mV, and signal amplification may be required for most applications, a load cell signal conditioner can be used to get 0-5V, 0-10V or 4-20mA signal which is proportional to applied force.The amplified output is can be easily processed by PLCs and data acquisition software.

    measure force
    The applied force can be displayed through a force indicator,force meter FPT is integrated with high accuracy/low noise 24 bit Sigma-Delta ADC,sampling speed up to 960Hz makes it suitable for both static and dynamic measurement,supports RS485 or RS232 communication port,can also output 0-5V,0-10V,0-20mV or 4-20mA amplified signal.

    Contact Details
    Force sensor torque transducer

    Contact Person: Mr. Tarik Lu

    Tel: 86-755-84536383

    Send your inquiry directly to us (0 / 3000)

    Other Products