Load cells,Force sensors,Torque transducers

Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsRotary torque sensor

Shaft-to-Shaft Rotary Torque Sensor 44lb-in 18lb*in 9lbf*in 4.5in-lb 1.77lb-in 0.88lb*in

Shaft-to-Shaft Rotary Torque Sensor 44lb-in 18lb*in 9lbf*in 4.5in-lb 1.77lb-in 0.88lb*in

    • Shaft-to-Shaft Rotary Torque Sensor 44lb-in 18lb*in 9lbf*in 4.5in-lb 1.77lb-in 0.88lb*in
    • Shaft-to-Shaft Rotary Torque Sensor 44lb-in 18lb*in 9lbf*in 4.5in-lb 1.77lb-in 0.88lb*in
    • Shaft-to-Shaft Rotary Torque Sensor 44lb-in 18lb*in 9lbf*in 4.5in-lb 1.77lb-in 0.88lb*in
    • Shaft-to-Shaft Rotary Torque Sensor 44lb-in 18lb*in 9lbf*in 4.5in-lb 1.77lb-in 0.88lb*in
  • Shaft-to-Shaft Rotary Torque Sensor 44lb-in 18lb*in 9lbf*in 4.5in-lb 1.77lb-in 0.88lb*in

    Product Details:

    Place of Origin: China
    Brand Name: Forsentek
    Certification: CE
    Model Number: FYF

    Payment & Shipping Terms:

    Minimum Order Quantity: 1pc
    Packaging Details: Shockproof packing
    Delivery Time: 3-12 working days
    Payment Terms: Western Union, T/T,Paypal, MoneyGram
    Supply Ability: 1790pcs/month
    Contact Now
    Detailed Product Description
    Usage: Rotating Torque Measurement Capacity: 0-44lb-in(Selectable)
    Output: Analog Output Connection: Coupling
    Structure: Shaft To Shaft

    Shaft-to-Shaft Rotary Torque Sensor 44lb-in 18lb*in 9lbf*in 4.5in-lb 1.77lb-in 0.88lb*in

    Shaft to Shaft Rotating Torque Sensor FYF is a slip-ring type torque transducer intended for rotating torque measurement in both clockwise and anticlockwise direction,slip rings are used to conduct the millivolt signal from the wheatstone bridge bonded on the sensing shaft which rotates together with motor shaft and gets the torque measured with maximum 0.2% non-linearity of the full capacity. Dynamic torque meter FYF offers 0-0.88in-lb / 0-1.77in*lb / 0-4.43lb-in / 0-9in-lb / 0-18lb*in / 0-27lbf*in / 0-44lb*in seven rated measuring ranges to choose from. Shafts located on both ends of the sensor can be connected to motor shaft and load shaft through couplings. Rotating speed of model FYF goes up to 4000RPM, the housing remains still while the shaft rotates along with the rotating object during measurement. Typical applications of dynamic torquemeter FYF are for example servo motor torque measurement, torque control for blenders, test bench applications, screw driver calibration, actuator test,and so on.

    shaft to shaft rotary torque sensor 44in-lb 18lb-in 9in-lb 4.5lb-in 0.88lb-inshaft to shaft dynamic torque sensor 0.88in-lb 4.5lb*in 9lb-in 18lb*in 44lb-in

    Specifications

    Rated capacity

    0.1N*m / 0.88lb*in / 1kg*cm

    0.2Nm / 1.77lb-in / 2kg*cm

    0.5N-m / 4.43lb*in / 5kg-cm

    1Nm/ 9lb-in / 10kg-cm

    2N*m / 18lb-in / 20kg*cm

    3Nm / 27lbf-in / 30kg*cm

    5N*m / 44in-lb / 50kg*cm

    Rated output 1.0 mV/V Compensated temperature -10...+40oC
    Excitation 3-15V Operating temperature -20...+60oC
    Zero balance ±0.05mV/V Temperature shift zero ±0.02% R.O./oC
    Nonlinearity ±0.2% R.O. Temperature shift span ±0.02% R.O./oC
    Hysteresis ±0.2% R.O. Input resistance 380±30 ohms
    Nonrepeatability ±0.1% R.O. Output resistance 350±5 ohms
    Creep(10min) ±0.1% R.O. Insulation resistance >2000M ohms
    Safe overload 150% F.S. Ingress protection IP40
    Ultimate overload 200% F.S. Material of element Stainless steel
    Cable Ø5*3000mm 4-core shielded (Mating connector included)
    Wiring code

    Clockwise@

    Red--Exc+ Black--Exc- Green--Sig+ White--Sig-

     

    A torque sensor is a transducer that converts mechanical torque into mV signal proportional to the applied torque.There are two types of torque transducers: Reaction type torque sensor and rotary type torque sensor. The acting torsion causes deformation of the measuring element,the bonded strain gauge deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply, the output signal between Sig+ and Sig- will change proportionally,thus the moment can be measured by measuring the output signal from the transducer.The output range of dynamic torque sensor FYF is normally within -15mV...+15mV, a signal conditioner can be used to convert mV signal into -5~5V, 0-10V or 4-20mA output for easy data processing.

    Taking rotary torque transducer FYF-5Nm working with amplifier FSC(-5-5V)-24V for example,the torque-voltage relationship will be 0-5NM in clockwise direction VS 0-5V output, 0-5N*m in anticlockwise direction VS 0-(-5V) output, 1V output corresponds to 1N*m torque in clockwise direction, -2V output corresponds to 2N*m torque in anticlockwise direction, and so on.

    A display unit can also be used to work with our torque transducers to get below functions:
    -Display torque value in real time
    -Peak holding to grab the maximum torque during testing
    -RS485 or RS232 interface
    -0-5V/0-10V/4-20mA analog output
    -Switch output for process control

    Shaft-to-Shaft Dynamic Torque Sensor 44lb*in 18lb-in 9lbf*in 4.5in-lb 1.77lb*in 0.88lb-in

    shaft to shaft rotating torque measurement device

    Click here to download datasheet

    Contact Details
    Force sensor torque transducer

    Contact Person: Mr. Tarik Lu

    Tel: 86-755-84536383

    Send your inquiry directly to us (0 / 3000)

    Other Products