|Place of Origin:||China|
|Minimum Order Quantity:||1pc|
|Packaging Details:||Shockproof carton|
|Delivery Time:||3-20 working days|
|Payment Terms:||T/T, Western Union, MoneyGram,Paypal|
|Type:||Threaded In-line Load Cell||Capacity:||0-500kg(Selectable)|
|Connection:||M6/M8 Rod End|
Miniature Tension Load cell 5kg 10kg 20kg 50kg Pull Force Measurement
Miniature In-line Type Pull Load Cell FL3F is made of stainless steel based on strain gauge technology intended for both pull and push force measurement. Inline Push Pull Force Sensor FL3F offers 0-5kg / 0-10kg / 0-20kg / 0-50kg / 0-100kg / 0-300kg / 0-500kg seven rated measuring ranges with mV/V output from the full wheatstone bridge. Compact design makes for rod end load cell FL3F especially suitable for force measurement applications where mounting space is limited. M6/M8 threaded rod located on each side enables force transducer FL3F to replace the existing structure and be easily embedded into mechanical shaft, the M6/M8 male thread can also be used to mount attachments such as eye bolts, bolt adapters,etc.,for different applications. Custom made service is also available as per client's request.
5kg / 50N / 11lb
10kg / 100N / 22lb
20kg / 200N / 44lb
50kg / 500N / 110lb
100kg / 1kN / 220lb
300kg / 3kN / 660lb
500kg / 5kN / 1100lb
|Rated output||1.0 mV/V||Compensated temperature||-10...+40oC|
|Zero balance||±0.1mV/V||Temperature shift zero||±0.05% R.O./oC|
|Nonlinearity||±1% R.O.||Temperature shift span||±0.05% R.O./oC|
|Hysteresis||±1% R.O.||Input resistance||1000±100 ohms|
|Nonrepeatability||±0.5% R.O.||Output resistance||1000±100 ohms|
|Creep(3min)||±0.3% R.O.||Insulation resistance||>5000Mohms|
|Safe overload||150% F.S.||Ingress protection||IP66|
|Ultimate overload||200% F.S.||Material of element||Stainless steel|
|Cable||Ø2*4000mm 4-core shielded cable|
Red--Power input+ Black--Power input-
Green--Signal output+ White--Signal output-
A load cell (or loadcell) is a transducer which converts force into a measurable electrical output. Although there are many varieties of loadcells, strain gauge load cells are the most commonly used type which is comprised of a solid metal body on which strain gauges have been secured to form a wheatstone bridge which delivers mV/V output.
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output of push and pull load cell FL3F is around 1mV/V.
Power supply is normally within 3-10V.
Load / Capacity is within 0-1.
So the output range of FL3F is normally within -10mV...+10mV for both push and pull force measurement.
Example one: Push Pull Force Sensor FL3F-5kg with 1.0mV/V sensitivity powered by 5V DC,the output range is -5mV...+5mV.
Example two: Compression and Tension Load Cell FL3F-10kg with 1.0mV/V rated output powered by 3.3V DC,the output range is -3.3mV...+3.3mV.
A signal conditioner can be used to convert mV signal into 0-5V/0-10V/4-20mA for easy signal processing.
Example: Push and Pull Sensor FL3F-50kg working with amplifier FSC(-10-10V)-24V,the load-voltage relationship will be 0-50kg compression load VS 0-10V output, 0-50kg tension load VS 0-(-10V) output.
Miniature Tension Load cell 50N 100N 200N 500N Pull Force Sensor