Reaction Type Torque Meter 10N-m 20Nm 50N*m 100Nm Torque Transducer With Indicator

Reaction Type Torque Meter 10N-m 20Nm 50N*m 100Nm Torque Transducer With Indicator

Flange Mounted Torque Meter FTA is strain gague based with mV/V output intended for non-rotating torque measurement,torque meter FTA offers 1.77 lb*in / 4.4lbf*in / 8.8 lb-in / 17.7 lbf*in / 26.5lbf-in / 44 lbf-in / 88lb*in / 177 lb-in / 265lbf-in / 442lbf-in / 885 lb*in eleven rated capacities to choose from.0.2NM-30Nm versions are made of aluminum while 50-100NM version are made of alloy steel.4-6.5 thru holes located on both ends of the torque cell can be used for bolting between shafts,switches or mounting plates.Torque load cell FTA has no moving parts which makes it very durable and suitable for industrial environments,it’s applicable for torque measurement in both clockwise and anticlockwise direction, torquemeter FTA can also be used for rotating torque measurement under certain configuration. Disconnectable cable with mating connector is included,each torque meter will come with a calibration certificate to guarantee the performance and quality.Typical applications for this type of torque meter are for example motor torque measurement, test bench applications, screw driver calibration, twist measurement and so on. Reaction torque sensor FTA can be modified or customized as per request.

Dimensions(in milimeter)

Specifications

A torque sensor is a transducer that converts mechanical torque into mV signal proportional to the applied torque.The acting torsion causes deformation of the measuring element,the bonded strain gage deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply, the output signal between Sig+ and Sig- will change proportionally,thus the moment can be measured by measuring the output signal from the transducer.

Torque sensor output: = (Power supply * Rated output) * Load / Capacity
Rated output is normally within 1mV/V~3mV/V.
Power supply is normally within 3-15V.
Load / Capacity is within 0-1.
So the torque sensor output signal is normally within 0-45mV(-45mV...+45mV for bidirectional load cell).
Example one: FTA-10Nm with 1.5mV/V rated output powered by 10V DC,the output range is -15mV...+15mV.
Example two: FTA-50Nm with 1.5mV/V rated output powered by 3.3V DC,the output range is -4.95mV...+4.95mV.

Torque sensor + Signal amplifier to deliver -5-5V 0-10V 4-20mA output.
Example: FTA-100N-m working with -10-10V amplifier,the torque-output relationship will be 0-100Nm torque in CW direction VS 0-10V output,0-100N*m torque in CCW direction VS 0-(-10V) output,which is linear within the error range.

Torque cell + Digital indicator:
-Display torque value in real time
-Peak holding to grab the maximum torque during testing
-RS485 or RS232 interface
-0-5V/0-10V/4-20mA analog output
-Switch output

Click here to download datasheet