|Place of Origin:||China|
|Minimum Order Quantity:||1pc|
|Packaging Details:||Shockproof carton|
|Delivery Time:||3-20 working days|
|Payment Terms:||T/T, Western Union, MoneyGram,Paypal|
|Type:||Smallest Weight Sensor||Output:||Analog|
|Structure:||Single Ended Beam Type|
Smallest Beam Load Cell Sensor 1kg Smallest Weight Transducer 10N
Smallest Weight Sensor FMZJ is strain gauge based intended for weight measurement within range of 0-1kg. Smallest Load Cell FMZJ utilizes 1000 ohms high resistance strain gauges,which is more energy-efficient and has better stability in the long run compared to commonly used 350 ohms strain gages. Aluminum construction, lightweight design with only 1g self-weight, miniature load sensor FMZJ is suitable for portable weighing devices. You may find subminiature weight transducer FMZJ applicable for weight monitoring & controlling in smart coffee machine, force simulators,home appliances, portable force measuring devices, game consoles,and so on. If you are looking for similar weighing sensors with different measuring ranges,custom made service is also available at Forsentek.
1kg / 10N / 2.2lb
|Sensitivity||1.0 mV/V||Compensated temperature||0...+40oC|
|Zero balance||±0.1mV/V||Temperature shift zero||±0.05% R.O./oC|
|Nonlinearity||±0.1% R.O.||Temperature shift span||±0.05% R.O./oC|
|Hysteresis||±0.1% R.O.||Input resistance||1000±100 ohms|
|Nonrepeatability||±0.05% R.O.||Output resistance||1000±100 ohms|
|Creep(2min)||±0.05% R.O.||Insulation resistance||>2000Mohms|
|Safe overload||120% F.S.||Ingress protection||IP60|
|Ultimate overload||200% F.S.||Material of element||Aluminum|
|Cable||AWG32*80mm(Longer cable upon request)|
Red--Power input+ Black--Power input-
Green--Signal output+ White--Signal output-
Load cell glossary:
Load Cell:A device which produces an output signal proportional to the applied weight or force.
Wheatstone Bridge:A Wheatstone bridge is a network of four resistive legs. One or more of these legs can be active sensing elements. The Wheatstone bridge is the electrical equivalent of two parallel voltage divider circuits. R1 and R2 compose one voltage divider circuit, and R4 and R3 compose the second voltage divider circuit. The output of a Wheatstone bridge is measured between the middle nodes of the two voltage dividers.
Excitation: The voltage applied to the input terminals of the load cell.
Rated Capacity: The maximum axial load the load cell is designed to measure within its specifications.
Non-linearity: The maximum deviation of the calibration curve from a straight line drawn between the no-load and rated outputs; expressed as a percentage of the rated output and measured on increasing load only.
Non-repeatability: The maximum difference between load cell output readings for repeated loadings under identical loading and environmental conditions.
Hysteresis: The maximum difference between load cell output readings for the same applied load; one reading obtained by increasing the load from zero and the other by decreasing the load from rated output; usually measured at half rated output and expressed in percent of rated output.
Creep: The change in load cell output occurring with specified period of time, while under load, and with all environmental conditions and other variables remaining constant; usually measured with rated load applied.
Safe Overload: The maximum load in percent of rated capacity which can be applied without producing a permanent shift in performance characteristics beyond those specified.
Ultimate Overload: The maximum load in percent of rated capacity which can be applied without producing a structural failure.
Operating Temperature: The extremes of temperature within which a load cell will operate without permanent adverse change to any of its performance characteristics.
Temperature Shift Span: The change in output due to a change in load cell temperature; usually expressed as a percentage of load per degree Celsius change in temperature.
Temperature Shift Zero: The change in zero balance due to a change in ambient temperature; usually expressed in percent of rated output per degree Celsius change in temperature.
Smallest Beam Type Weight Sensor 1kg Smallest Load Cell Transducer 10N
Multi axis load cell 1kg 2kg 5kg 10kg 3-axis force measurement transducer
Triaxial force sensor 1kN 500N 300N 200N 100N 3-axis load cell
3 axis load cell 200kN 100kN 50kN 20kN 10kN 5kN 2kN 1kN Triaxial force sensor
Triaxial load cell 1000kg 500kg 200kg 100kg Triaxial force sensor
Miniature rotary torque sensor 1NM 2NM 3NM 5NM rotating torque measurement
Rotary torque sensor 10NM 20NM 50NM 100NM 200NM 300NM 500NM torque transducer
Contactless rotating type torque speed sensor measuring motor torque
Micro force sensor 50N 100N 200N 500N Micro loadcell sensor
10KG miniature load cell sensor 5kg small size weight transducer 2kg
Miniature force transducer 0-1000N miniature force sensor 0-220 lbs
Miniature force transducer 50N 100N 200N 500N 1kN 2kN force measurement